Identify your console
Choose the outside shape that looks closest. A case, label or motherboard may have been replaced.
Not sure Ask us to verify it.
Original Xbox 360 Deeper, curved front profile.
Xbox 360 S Slimmer, angled front profile.
Xbox 360 E Later, squared front profile.
How are you identifying it?
Visual identification
Serial number (not decoded)
Manufacture date
Serial number, local only
It stays in this browser, is not decoded, sent or saved, and does not confirm a board.
Manufacture date
A date is a clue only. It is checked for conflicts, never decoded into a board.
Where can I find these details?
Check the console’s rear information label and read the amperage beside 12V. Do not use the power-supply label as a substitute. The case shape and label are clues, not proof of the board inside.
See ConsoleMods identification notes ↗
Continue to evidence →
Check the label and history
Only a documented Xbox 360 S rear-label match is used as an automatic candidate. It still does not verify the installed motherboard.
Console rear-label amperage
Not sure
10.83A
9.6A
16.5A
14.2A
12.1A
Other
I read this on the console itself, not on a separate power supply.
Repair or refurbishment history
Not sure
No known repair
Repaired or refurbished
Motherboard may have been swapped
Motherboard revision, only if independently confirmed
Not identified
Trinity
Corona (Slim)
Falcon
Jasper
Tonasket
Xenon
Zephyr
Corona (E)
Winchester
Other E revision
A customer-selected revision is not independently verified.
Back
Review answers →
